SPECIFICATIONS
TM 5-3805-263-14&P-3
NEW AND USE AGAIN DIMENSIONS FOR
PARTS IN SERVICE BRAKES
The new and use again dimensions for each brake disc
and disc assembly are shown in the chart which follows
Also given in the chart are dimensions to show when a
brake pack is worn and needs inspection and/or
replacement of parts as needed Check each disc
assembly for possible damage or any indication that the
friction material is badly burned If only one side of the
disc assembly is worn, the grooves must be at least 012
in. (0O 30 mm) deep During brake installation, put the
thicker disc assemblies in the middle of the pack where
wear is faster.
3-150
