TM 5-3805-263-14&P-3
HYDRAULIC SYSTEM AND STEERING
HYDRAULIC PUMP
(8J5846)
(Part of 8J6155 Pump Group)
Rotation is counterclockwise when seen from drive end.
Type of pump: Gear.
For test use SAE 10W oil at 150F (65C).
Output .............................10 U.S. gpm (38 liter/min)
at a pressure of ................ 1000 psi (6900 kPa)
with a pump at ................................... 2000 rpm
with engine at .................................... 2000 rpm
Torque for bolts .................27 2 lb. ft. (38 3 Nm)
(1)
(2)
Plate (Bronze face of plate must be against gears.)
Torque for bolts .................27 2 lb. ft. (38 3 Nm)
(3)
DRIVE FOR HYDRAULIC PUMP
(1)
Torque for nut on shaft of
hydraulic pump ..........135 10 lb. ft. (184 14 Nm)
Torque for bolt ...................40 5 lb. ft. (55 7 Nm)
(2)
Torque for bolt ...................40 5 lb. ft. (55 7 Nm)
(3)
HYDRAULIC PUMP MOUNTING
(1)
Torque for
mounting bolts ...................34 5 lb. ft. (46 7 Nm)
3-95
