TM 5-3805-263-14&P-3
SPECIFICATIONS
Hydraulic Pump (Cont.)
(19) 8J6306 Spring (inner):
Length under test force.............. 2.60 in. (66.0 mm)
Free length after test ............. 17.7 .9 lb. (79 4 N)
Length after test....................... 4.75 in. (120.6 mm)
Outside diameter ........................ 1.10 in (27.9 mm)
(20) 8J8462 Shim to make the adjustment for the
pressure of the oil to move the shuttle valve.
Pressure to move
shuttle valve......... 1500 50 psi (10,300 345 kPa)
(21) 3G1682 Spring (shuttle valve):
Length under test force.............. 1.28 in. (32.5 mm)
Test force......................... 36.4 2.7 lb. (163 12 N)
Free length after test ................. 1.72 in. (43.7 mm)
Outside diameter ....................... 0.78 in. (19.8 mm)
(22) 9J6305 Spring (outer)
Length under test force.............. 1.43 in. (36.3 mm)
Test force................................. 9.2 .5 lb. (41 2 N)
Free length after test ................. 2.50 in. (63.5 mm)
Outside diameter ....................... 1.41 in. (35.8 mm)
(23) 6F8205 Washers to make the adjustment for the
maximum discharge pressure.
Maximum discharge
pressure............... 3550 20 psi (24,500 140 kPa)
(24) 9S4982 Spring in valve assembly:
Length under test force.............. 0.57 in. (14.5 mm)
Test force............................ 61 0.05 lb. (2.4 .2 N)
Free length after test ................. 1.09 in. (27.7 mm)
Outside diameter ............................ 39 in. (9.9 mm)
(25) Torque for bolts ...... 110 10 lb. in. (12.4 1.1 Nm)
3-94
