TM 5-3805-261-34
EARTHMOVING EQUIPMENT COMPONENTS MAINTENANCE.
12-10
Scarifier Acuating Shaft Assembly. (Sheet 4 of 4)
INSTALLATION (cont )
WARNING
Do not allow chilled parts to contact unprotected skin or they may cause
aid
immediately. Always wear suitable protective clothing and gloves when handling
NOTE
Chill bearings and new seals in freezer for two hours
Allow clearance on both sides of bearings for seals
3.
Using an arbor press, install bearing (32) into each
4.
Install two new seals (31) in each bracket (33, Figure
5.
Install items 33 thru 31 as an assembly onto both sides
6.
Attach hoist and slings to each end of shaft (36) and
7.
Using forklift truck or equivalent vehicle, position items
frame.
NOTE
Return 130G Grader to original equipment condition.
Figure 12-
Figure 12-
Figure 12-34.
End of Task
12-44
Figure 12-
