TM 5-3805- 26 1-34
HYDRAULIC SYSTEM MAINTENANCE. (cont)
10-22.
Hydraulic Pump and Control Valve Lines and Fittings. (Sheet 5 of 8)
REMOVAL (cont)
30. Remove hose assembly (46), elbow
(47) and preformed packing (48,
Figure 10-164) from block.
Discard preformed packing (48).
31. Remove three bolts (49), washers
(50 and 51) and mountings (52)
from plate (53,Figure 10-165).
32. Remove plate (53).
CLEANING
Clean all parts. Refer to Chapter 2.
INSPECTION
Inspect all parts. Refer to Chapter
2.
INSTALLATION
1.
Install plate (53, Figure 10-165).
2.
Install three mountings (52),
washers (51 and 50) and bolts
(49) on plate (53).
3.
Install new preformed packing
(48), elbow (47) and hose
assembly (46, Figure 10-164) on
block.
10-132
Figure 10-164.
Figure 10-165.
