TM 5-3805-261-34
STEERING MAINTENANCE. (cont)
8-7.
Combination Valve. (Sheet 6 of 9)
TESTING (cont)
13.
Using a spring tester and torque wrench, apply test
load to spring (45, Figure 8-29). Test load is 26.3
to 30.9 lb.
14.
Measure length of spring (45, Figure 8-30). Test
length should be 1.66 inches.
15.
Remove test load.
16.
Measure free length of spring (45). Free length
should be 2.46 inches.
17.
Using a spring tester and torque wrench, apply
test load to spring (55). Test load is 8 lb.
18.
Measure length of spring (55). Test length should
be 0.80 inches.
19.
Remove test load.
20.
Measure free length of spring (55). Free length
should be 1.2 inches.
ASSEMBLY
1.
Install new preformed packing (69) and elbow
(68) in body (70, Figure 8-28).
2.
Install new preformed packing (67) and elbow
(66).
3.
Install new preformed packing (65) and plug (64).
Go to Sheet 7
8-26
Figure 8-30.
Figure 8-28.
Figure 8-29.
