TM 5-3805-261-34
STEERING MAINTENANCE. (cont)
8-7.
Combination Valve. (Sheet 2 of 9)
DISASSEMBLY
1.
Remove three bolts (1, Figure 8-18).
2.
Remove items 6 thru 33 as an assembly from items
34 thru 70 as an assembly.
3.
Remove and discard preformed packings (2, 3, 4
and 5).
4.
Remove two bolts (6), washers (7), boot (8) and items
9 thru 17 as an assembly (Figure 8-19).
5.
Remove preformed packing (11), bearing (12), ring
(13), preformed packing (14), lever (15) and bearing
(16, Figure 8-20). Discard preformed packings (11
and 14).
6.
Remove nut (9) and screw (10) from housing (17).
7.
Remove plug (18) and preformed packing (19,
Figure 8-21). Discard preformed packing (19).
8.
Remove plug (20) and preformed packing (21).
Discard preformed packing (21).
9.
Remove plug (22) and preformed packing (23).
Discard preformed packing (23).
10.
Remove nut (24), washer (25) and elbow (26).
11.
Remove plug (27) and preformed packing (28)
from body (29). Discard preformed packing (28).
Go to Sheet 3
8-22
Figure 8-18.
Figure 8-19.
Figure 8-20.
