TM 5-3805-261-34
WHEEL AND TIRE MAINTENANCE. (cont)
7-2.
Tire Removal. (Sheet 4 of 5)
INSTALLATION (cont )
3.
Install items 11 thru 7 as an assembly to tire (6,
Figure 7-2).
4.
Attach hoist and sling to items 11 thru 6 as an
assembly, lift up, turn over and set down on
work surface with inside face of wheel (11,
Figure 7-1) downward. Remove hoist and sling.
5.
Install flange (4) to wheel (11), making sure that
groove for preformed packing (5, Figure 7-4)
is exposed around entire circumference of wheel.
6.
Apply non-detergent rubber lubricant to new
preformed packing (5).
NOTE
Make sure that preformed packing is not
twisted or cut during installation.
7.
Install preformed packing (5) in second (shallow)
groove of wheel (11, Figure 7-5).
NOTE
Make sure that lock ring is seated in
first groove all around wheel.
8.
Install lock ring (3) in first (deep) groove of
wheel (11).
9.
Apply non-detergent lubricant to bead of outer
side of tire.
Go to Sheet 5
7-6
Figure 7-5.
Figure 7-4.
Figure 7-2.
Figure 7-1.
