TM 5-3805-261-34
BRAKES MAINTENANCE.
6-13.
Air Compressor Assembly. (Sheet 7 of 10)
ASSEMBLY
7.
Position items 47 thru 45 as an
assembly on end of crankcase (60,
Figure 6-54).
8.
Install four lockwashers (43) and
bolts (42).
9.
Install plug (44) and tighten to
16 ft-lb torque.
NOTE
Steps 11 thru 19 are for
assembly of one rod and
piston assembly. Repeat
these steps for assembly of
remaining rod and piston
assembly.
10.
Lubricate piston (59) and three
new rings (55) with oil.
11.
Install three new rings (55) on
piston (59). Stagger the
position of gaps between three
rings (55) 120 degrees apart.
12.
Position rod (58) in piston (59).
13.
Install pin (57) by pressing pin
(57) in piston (59) and rod (58).
14.
Install two plugs (56) in piston
(59).
15.
Using piston ring compression
tool, compress three rings (55)
in grooves of piston (59).
16.
Turn crankshaft (49) until one of
the rod (58, Figure 6-49)
journals is in the downward
center position.
Go to Sheet 8
6-65
Figure 6-54.
Figure 6-49.