TM 5-3805-261-34
BRAKES MAINTENANCE.
6-13.
Air Compressor Assembly. (Sheet 5 of 10)
DISASSEMBLY
25.
Remove six bolts (51) and lock-
washers (52) from block (53) on
crankcase (60, Figure 6-51).
26.
Remove block (53) and gasket (54)
from crankcase (60). Discard
gasket (54). Remove all gasket
material from mounting surfaces.
NOTE
Steps 32 thru 36 are for removal of
one rod and piston assembly.
Repeat these steps for
disassembly of remaining rod
and piston assembly.
27.
Remove items 55 thru 59 as an
assembly by pushing up through
top of crankcase (60).
28.
Remove and discard three rings
(55) from piston (59, Figure
6-52).
29.
Remove two plugs (56) from piston
(59).
30.
Remove pin (57), if necessary.
31.
Remove rod (58) from piston (59).
CLEANING
Clean all parts. Refer to Chapter 2.
INSPECTION
Inspect all parts. Refer to Chapter
2.
Go to Sheet 6
6-63
Figure 6-51.
Figure 6-52.
