TM 5-3805-261-34
BRAKES MAINTENANCE. (cont)
6-10.
Air Brake Reservoir. (Sheet 2 of 5)
REMOVAL
1.
Loosen four nuts (2, Figure
6-24).
2.
Support reservoir (1). Weight of
reservoir (1) is approximately 21
lbs.
3.
Remove four nuts (2), washers (3
and 4), bolts (5), washers (6),
grommets (7) and washers (8).
4.
Remove drain cock (9), fitting
(10) and bushing (11) from
reservoir (1, Figure 6-25) from
under rear of vehicle.
NOTE
All hose and tube assemblies must be
tagged before disconnecting to
aid in installation. Cap all, hose
and tube ends and plug all open ports
to prevent contamination
5.
Disconnect hose assembly (26).
6.
Remove elbow (12), valve (13) and
elbow (14).
7.
Disconnect hose assembly (15).
8.
Remove connector (16).
9.
Disconnect hose assembly (17).
10.
Remove connector (18) and tee
(19).
Go to Sheet 3
6-40
Figure 6-24.
Figure 6-25.
