TM 5-3805-261-34
TRANSMISSION MAINTENANCE.
5-10.
Transmission Oil Pump. (Sheet 5 of 7)
REMOVAL
13. Remove items 39 thru 41 as an
assembly (Figure 5-57). Pull
items 39 thru 41 as an assembly
away from dowel on transmission
and turn so it can be lowered out
bottom of vehicle.
14. Remove and discard preformed
packing (39) and gasket (40) from
oil pump (41, Figure 5-58).
Remove all gasket material from
mounting surfaces.
CLEANING
Clean all parts. Refer to Chapter 2.
INSPECTION
Inspect all parts. Refer to Chapter
2.
INSTALLATION
1.
Using floor jack and wood blocks,
position oil pump (41, Figure
5-55) at rear of engine
compartment.
2.
Install oil pump (41), new gasket
(40), new preformed packing (39),
five lockwashers (38), bolts
(37), two lockwashers (36) and
bolts (35, Figure 5-59).
Go to Sheet 6
5-45
Figure 5-57.
Figure 5-58.
Figure 5-59.