TM 5-3805-261-34
TRANSMISSION MAINTENANCE.
5-11. Transmission Oil Cooler. (Sheet 2 of 5)
REMOVAL
NOTE
All hoses, lines and fittings
must be tagged before
disconnecting to aid in
nstallation. Cap all hose
ends to prevent contamina-
tion.
1.
Disconnect air line (1) from
elbow (30, Figure 5-60).
2.
Remove bolt (2), oil line (3) and
preformed packing (4) from
transmission oil cooler core
(23). Discard preformed packing
(4).
3.
Remove bolt (5), oil line (6) and
preformed packing (7) from
transmission oil cooler core
(23). Discard preformed packing
(7).
4.
Loosen clamp (9) and slide down
on water hose (8).
5.
Remove water hose (8), clamp (9),
adapter (10), elbow (11) and
adapter (12).
6.
Remove four bolts (13, Figure
5-61).
7.
Remove bolts (14 and 15).
8.
Remove and discard gaskets (16
and 17). Remove all gasket
material from mounting surfaces.
Figure 5-61.
Go to Sheet 3
5-49
.
