TM 5-3805-261-23-2
CIRCLE DRIVE SWIVEL ASSEMBLY REPAIR - CONTINUED
0345 00
ASSEMBLY
1.
Lubricate new seals (14 and 15) with clean oil and install on rotor (9).
2.
Lubricate seven new preformed packings (8) and new seals (7) with clean oil and install in body (6).
3.
Install rotor (9) in body (6).
4.
Lubricate four new preformed packings (10) with clean oil and install in cover (11).
5.
Install cover (11), four new lockwashers (13), and bolts (12) in body (6).
6.
Lubricate new seals (4 and 5) with clean oil.
NOTE
Add or remove shim(s) to obtain required gap.
7.
Install seals (4 and 5), shim (s) (3), retainer (2), and
1
two screws (1) in body (6).
2
8.
Use feeler gauge to measure gap between retainer (2)
and body (6). Gap should be 0.005 to 0.020 in. (0.13 to
0.51 mm).
3
4
5
6
397-1703
9.
Install circle drive swivel assembly (WP 0263 00).
END OF WORK PACKAGE
0345 00-3/(-4 Blank)
