TM 5-3805-261-23-2
ARTICULATION CYLINDER REPAIR - CONTINUED
0336 00
ASSEMBLY
1.
Apply thin coat of clean oil to new seals (15 and 16), new ring (13), and new preformed packing (14).
2.
Use a seal installer to install new seals (15 and 16) into housing (12).
3.
Install preformed packing (14) and ring (13).
4.
Position cap (5) and housing (12) assembly on rod (4).
5.
Use seal expander to install ring (9) and new seal assembly (11) on piston (10).
6.
Install piston (10) assembly on rod (4).
7.
Apply thin coat of thread lubricant to threads of bolt (8) and install washer (7) and bolt to end of rod (4). Tighten bolt to
800 lb-ft (1,085 Nm).
4
10
7
8
397-2369
0336 00-5
