TM 5-3805-261-23-2
BLADE LIFT CYLINDER REPAIR - CONTINUED
0335 00
ASSEMBLY - CONTINUED
7.
Install piston (8) assembly on rod (6).
7
8.
Apply thin coat of thread lubricant to threads of bolt
(7) and install washer (9) and bolt to end of rod (6).
9
Tighten bolt to 800 lb-ft (1,085 Nm).
8
6
397-1996
9.
Apply thin coat of grease to outside of head (12) and inside of hub (5).
10.
Install rod (6) assembly into cylinder (4).
NOTE
Tighten hub with rod assembly fully extended. This will keep cylinder, piston, and head in alignment.
11.
Install hub (5) to cylinder (4). Tighten hub to 450 lb-ft
(610 Nm).
4
6
12
5
397-1995
12.
Install blade lift cylinder (WP 0245 00).
END OF WORK PACKAGE
0335 00-6
