TM 5-3805-261-23-2
BLADE LIFT CYLINDER REPAIR - CONTINUED
0335 00
DISASSEMBLY - CONTINUED
9.
Remove hub (5) from rod (6).
5
6
397-2000
CLEANING AND INSPECTION
Clean and inspect all parts in accordance with WP 0020 00.
ASSEMBLY
1.
Position hub (5) on rod (6).
2.
Apply thin coat of clean oil to new seals (15, 16, and 17).
3.
Use seal installer to install seals (15, 16, and 17) in head (12). Lip on inner seal (15) and center seal (16) face inside head
(12). Lip on outside seal (17) faces outside head.
4.
Install new preformed packing (13) and new packing retainer (14) on head (12).
5.
Position head (12) assembly on rod (6).
6.
Use a seal expander to install bushing (10) and new
10
seal assembly (11) on piston (8).
8
11
397-1997
0335 00-5