TM 5-3805-261-23-2
CENTERSHIFT CYLINDER REPAIR - CONTINUED
0333 00
DISASSEMBLY - CONTINUED
7.
Remove packing retainer (11), preformed packing
10
(12), and seals (10, 13, and 14) from head (9). Discard
preformed packing and seals.
9
11
12
14
13
397-1983
8.
Remove hub (2) from rod (1).
CLEANING AND INSPECTION
Clean and inspect all parts in accordance with WP 0020 00.
ASSEMBLY
1.
Position hub (2) on rod (1).
1
2
397-1984
2.
Apply thin coat of clean oil to new seals (10, 13, and 14), new preformed packing (12), and packing retainer (11).
3.
Use a seal installer to install new seals (10, 13, and 14) into head (9). Lips of seals (10 and 13) is toward inside of head.
Lip of seal (14) is toward outside of head.
4.
Install packing retainer (11) and new preformed packing (12) on head (9).
5.
Install head (9) assembly on rod (1).
0333 00-3