TM 5-3805-261-23-2
CENTERSHIFT CYLINDER REPAIR - CONTINUED
0333 00
ASSEMBLY - CONTINUED
6.
Using seal expander, install new seal assembly (8) and
4
bushing (7) on piston (4).
7
8
397-1981
7.
Install piston (4) assembly on rod (1).
1
8.
Apply thin coat of thread lubricant to threads of bolt
(6) and install washer (5) and bolt to end of rod (1).
Tighten bolt to 800 lb-ft (1,085 Nm).
4
5
6
397-1980
9.
Apply clean oil to outside of head (9), inside of hub (2), and inside of cylinder (3).
10.
Install rod (1) assembly into cylinder (3).
NOTE
When tightening hub, ensure that rod is fully extended. This will keep cylinder, piston, and head aligned.
11.
Install hub (2) on cylinder (3). Tighten to 450 lb-ft
1
2
(610 Nm).
9
3
397-1979
397-1979
12.
Install centershift cylinder (WP 0243 00).
END OF WORK PACKAGE
0333 00-4