TM 5-3805-261-23-2
HYDRAULIC PUMP ASSEMBLY AND MOUNTING REPLACEMENT - CONTINUED
0329 00
INSTALLATION - CONTINUED
12.
Install new preformed packing (20), tube assembly
(21), flange (17), clip (18), and four bolts (19).
24
13.
Install tee (16).
23
14.
Connect hose assemblies (15 and 14) to tee (16).
15.
Install four washers (22) and bolts (23) on mounting
22
bracket (24). Tighten bolts to 34 lb-ft (46 Nm).
14
20
21
16
15
17
18
19
397-1473
16.
Connect hose assembly (3) to top of hydraulic pump assembly (4).
17.
Install hose assembly (12) on elbow (13) of combination valve (2).
18.
Connect hose assemblies (11 and 10) to front of hydraulic pump assembly (4).
19.
Install new preformed packing (5), hose assembly (9), two flange halves (6), four washers (7), and bolts (8) on left side
of hydraulic pump assembly (4).
13
2
12
8
6
7
3
5
4
9
6
12
10
397-1472
11
20.
Install hydraulic pump drive (WP 0232 00).
21.
Install hydraulic tank (WP 0339 00).
22.
Remove pivot locking pin (TM 5-3805-261-10) and straighten machine.
END OF WORK PACKAGE
0329 00-6