TM 5-3805-261-23-2
ROPS REPLACEMENT (CCE MACHINE) - CONTINUED
0327 00
INSTALLATION
1.
Position pad (13) and two pads (12 and 14).
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during proce-
dure. Ensure that any lifting device used is in good condition and of suitable load capacity. Keep clear of
heavy parts supported only by lifting device. Failure to follow this warning may cause injury or death to per-
sonnel.
NOTE
ROPS weigh 2,058 lb (964 kg).
2.
Attach sling to ROPS (2).
3.
Raise ROPS (2).
4.
Install pad (10) and two pads (11).
5.
Position two bushings (8) and four mounts (9).
6.
Lower ROPS (2) to within 0.5 in. (12.7 mm) of opera-
tor's platform.
2
9
8
397-4350
0327 00-5