TM 5-3805-261-23-2
ROPS REPLACEMENT (CCE MACHINE) - CONTINUED
0327 00
INSTALLATION - CONTINUED
CAUTION
Do not lower ROPS onto operator's platform and slide to align bolts. This improper procedure could result
in damage to pads. Any significant damage to pads could cause high sound levels for the operator.
7.
Install six bolts (7) and retainers (6), starting six bolts
by hand and partially tightening.
6
7
397-4349
NOTE
3
Holes for two bolts must be aligned before
bolts can be tightened to proper torque.
8.
Install two bolts (3), washers (4), and nuts (5) in two
front corners of cab. Tighten bolts to 870 lb-ft (1,180
Nm).
4
5
397-4348
9.
Tighten six bolts (7) to 870 lb-ft (1,180 Nm).
7
397-4353
0327 00-6