TM 5-3805-261-23-2
ARTICULATION HITCH BEARING REPLACEMENT (CCE AND TYPE I MACHINES) - CONTINUED
0325 00
REMOVAL - CONTINUED
NOTE
Tie shim(s) together and tag for identification to aid in installation.
Inspect bearings before removing. Remove bearings only if inspection indicates replacement is neces-
sary.
3.
Remove shim(s) (8) and bearing (7).
4.
Remove cap (9) and seal (10) from bottom of lower
pin bore. Discard seal.
8
FRONT FRAME
7
10
9
LOWER PIN BORE
397-1968
5.
Use puller adapters, nut, washer, hydraulic puller, and
ring installer to remove collar (11) from upper pin
bore of front frame.
11
6.
Inspect bearing (12). Replace if cracked, broken, dis-
torted, gouged, or excessively worn.
7.
Use puller adapters, nut, washer, hydraulic puller, and
two bolts to remove bearing (12), if necessary.
FRONT
FRAME
UPPER PIN BORE
12
397-1970
0325 00-3
