TM 5-3805-261-23-2
FRAME SEPARATION AND CONNECTION REPLACEMENT
(CCE AND TYPE I MACHINES) - CONTINUED
0324 00
INSTALLATION - CONTINUED
33.
Connect front pin of articulation cylinder (WP 0336 00).
34.
Connect air brake lines to brake control valve (WP 0161 00).
35.
Install mounting hardware and connect EMS harness to all items in engine compartment (WP 0291 00).
36.
Install mounting hardware and connect supplemental steering harness to all items in engine compartment (WP 0290 00).
37.
Install mounting hardware and connect blackout light harness to all items in engine compartment (WP 0287 00).
38.
Install mounting hardware and connect main harness to all items in engine compartment (WP 0286 00).
39.
Install mounting hardware and connect disconnect switch cable at starting motor (WP 0142 00).
40.
Connect hydraulic line at relief valve (WP 0250 00).
41.
Connect oil cooler to hydraulic pump relief valve (WP 0250 00).
42.
Connect hydraulic hose at hydraulic tank (WP 0250 00).
43.
Connect supplemental steering lines to hydraulic tank (WP 0172 00 and WP 0173 00).
44.
Fill engine coolant (WP 0024 00).
45.
Install seat (WP 0200 00).
46.
Install hydraulic pump drive shaft (WP 0232 00).
47.
Remove wheel lean lock bolt (TM 5-3805-261-10).
48.
Connect battery cables (WP 0125 00).
49.
Install left and right side engine panels (WP 0182 00).
END OF WORK PACKAGE
0324 00-17/(-18 Blank)
