TM 5-3805-261-23-2
FINAL DRIVE ASSEMBLY REPLACEMENT - CONTINUED
0309 00
REMOVAL - CONTINUED
21.
Remove roller bearing (41) from shaft (42).
41
42
397-4233
22.
Remove and discard cup (43) and seal (44) from hous-
43
ing (23).
44
23.
Remove and discard cup (45).
23
45
397-4234
CLEANING AND INSPECTION
Clean and inspect all parts in accordance with WP 0020 00.
INSTALLATION
1.
Lower temperature of new cup (45) and install in
45
housing (23).
2.
Lubricate new seal (44) with oil and install with lip of
23
new seal toward new cup (43).
3.
Turn housing (23) over with new cup (43) and new
seal (44) installed.
4.
Lower temperature of new cup (43) and install.
397-4236
43,44
5.
Heat roller bearing (41) and install on shaft (42).
0309 00-8