TM 5-3805-261-23-2
TRANSMISSION OIL FILLER AND OIL LEVEL GAUGE REPLACEMENT - CONTINUED
0299 00
REMOVAL - CONTINUED
5.
Remove gauge rod (19) from tube (18).
6.
Remove bolt (15) and washer (14) from clip (13).
19
7.
Slide clip (13) over.
8.
Remove two self-locking bolts (17), lockwashers (16),
tube (18), and gasket (12). Discard self-locking bolts,
lockwashers and gasket.
18
17
16
15
12
14
13
397-476
CLEANING AND INSPECTION
Clean and inspect all parts in accordance with WP 0020 00.
INSTALLATION
1.
Install new gasket (12), tube (18), two new lockwashers (16), and new self-locking bolts (17).
2.
Position clip (13).
3.
Install washer (14) and bolt (15) in clip (13).
4.
Install gauge rod (19) in tube (18).
5.
Install cap (5), new lockwasher (6) and screw (7) on tube assembly (8).
6.
Install new preformed packing (9), tube assembly (8), two new lockwashers (10), and bolts (11).
7.
Install clamp (4) and bolt (3).
8.
Install clamp (2) and bolt (1).
9.
Refill transmission oil to proper level (WP 0147 00).
10.
Turn battery disconnect switch to ON position and start engine (TM 5-3805-261-10).
11.
Check for leaks. Stop engine.
12.
Install right side engine panel (WP 0182 00).
END OF WORK PACKAGE
0299 00-3/(-4 Blank)