TM 5-3805-261-23-2
CAB MAIN WIRING HARNESS REPLACEMENT (CCE MACHINE) - CONTINUED
0292 00
INSTALLATION
CAUTION
Do not position cab main wiring harness against any rough surface. Failure to follow this procedure could
cause chafing.
NOTE
Route cab main wiring harness exactly as it was removed.
1.
Position cab main wiring harness (1) on machine.
2.
Connect cab main wiring harness (1) to wiring harnesses, lower wiper motor (5) (WP 0206 00), upper wiper motor (4)
(WP 0207 00), headlights (6 and 3) (WP 0104 00), cab signal lights (7 and 2) (WP 0107 00), and cab fuse fox (10) (WP
0095 00).
3.
Install harness clip (8) and mounting clips (9).
4.
Connect cab main wiring harness (1) to rear wiper switch (WP 0208 00).
5.
Install two plates behind right cab door hinge.
6.
Install windshield washer (WP 0209 00).
7.
Install cab switch panel (WP 0085 00).
8.
Connect battery cables (WP 0125 00).
END OF WORK PACKAGE
0292 00-3/(-4 Blank)
