TM 5-3805-261-23-2
FLYWHEEL AND FLYWHEEL HOUSING REPLACEMENT - CONTINUED
0272 00
INSTALLATION - CONTINUED
10.
Tighten 13 bolts (7), in sequence, to 75 lb-ft (102
Nm).
11.
Trim new gasket (5) even with bottom of cylinder
block and flywheel housing (6).
12.
Remove sling, two 3/8-16-2B bolts, and link brackets.
7
397-1308
13.
Install two 5/8-18NF guide bolts in end of crankshaft.
3/8-15-2B BOLT
LINK
14.
Install link brackets and 3/8-16-2B bolt on flywheel
BRACKET
assembly (2).
15.
Attach sling to link brackets.
16.
Position flywheel assembly (2) over end of crankshaft,
using sling.
17.
Align matchmarks on flywheel assembly (2) and
crankshaft.
18.
Position flywheel assembly (2) on two 5/8-18NF
guide bolts, using sling.
5/8-18NF
2
GUIDE BOLTS
397-1309
19.
Install seven of nine screws (3).
1
20.
Remove two 5/8-18NF guide bolts.
21.
Install remaining two screws (3).
22.
Install plugs (1 and 4).
23.
Remove sling, 3/8-16-2B bolt, and link brackets.
3
5
397-1310
(HIDDEN) 4
24.
Install oil pan and plate (WP 0275 00).
25.
Apply gasket cement to bottom of gasket (5), where gasket contacts oil pan plate.
26.
Install starting motor (WP 0067 00).
27.
Install engine (WP 0267 00).
END OF WORK PACKAGE
0272 00-5/(-6 Blank)
