TM 5-3805-261-23-2
FLYWHEEL AND FLYWHEEL HOUSING REPLACEMENT - CONTINUED
0272 00
INSTALLATION
1.
Apply gasket cement to gasket (5).
5
2.
Position new gasket (5) on rear of engine block.
6
3.
Install two link brackets and 3/8-16-2B bolts on fly-
wheel housing (6).
4.
Attach sling to link brackets.
5.
Install two 1/2-13NC guide bolts.
6.
Position flywheel housing (6) on 1/2-13NC guide
bolts, using sling.
7.
Install 11 of 13 bolts (7).
397-1306
7
8.
Remove two 1/2-13NC guide bolts.
3/8-16-2B BOLT
9.
Install remaining two of 13 bolts (7).
6
7
397-1307
1/2-13NC GUIDE BOLTS
0272 00-4