TM 5-3805-261-23-1
HYDRAULIC CONTROL VALVES REPLACEMENT - CONTINUED
0237 00
INSTALLATION - CONTINUED
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during proce-
dure. Ensure that any lifting device used is in good condition and of suitable load capacity. Keep clear of
heavy parts supported only by lifting device. Failure to follow this warning may cause injury or death to per-
sonnel.
NOTE
Control valve assembly weighs 85 lb (39 kg).
50
3.
With assistance, install control valve (30) assembly on
machine with two mountings (52), washers (53), and
51
bolts (54).
30
4.
Install washer (50) and bolt (51).
54
53
52
397-701
38 39 40
41
5.
Install new preformed packing (38) and connector
(39).
6.
Install new preformed packing (45) and connector
(44).
42
7.
Install new preformed packing (49) and elbow (48).
8.
Install new preformed packings (40, 43, and 47) and
connect hose assemblies (41, 42, and 46) to connec-
tors (39 and 44) and elbow (48).
45 44 43
47
46
49
48
397-700
0237 00-7
