TM 5-3805-261-23-1
HYDRAULIC CONTROL VALVES REPLACEMENT - CONTINUED
0237 00
REMOVAL - CONTINUED
12
9 10 11
3.
Disconnect hose assemblies (17, 20, and 9) from
elbow (14) and connectors (18 and 11). Remove and
discard preformed packings (16, 15, and 10).
4.
Remove elbow (14), and preformed packing (13). Dis-
card preformed packing.
5.
Remove connector (18) and preformed packing (15).
Discard preformed packing.
6.
Remove connector (11) and preformed packing (12).
Discard preformed packing.
13
20 19 18
14
16 15
17
397-695
7.
Remove bolt (24), washer (25), and rubber mount (26).
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during proce-
dure. Ensure that any lifting device used is in good condition and of suitable load capacity. Keep clear of
heavy parts supported only by lifting device. Failure to follow this warning may cause injury or death to per-
sonnel.
NOTE
Control valve assembly weighs 85 lb (39 kg).
8.
With assistance, remove two bolts (23), washers (22),
1
rubber mounts (21), and control valve (1) assembly
from machine.
23
22
26
21
25
24
397-696
0237 00-3
