TM 5-3805-261-23-1
HYDRAULIC CONTROL VALVES REPLACEMENT - CONTINUED
0237 00
INSTALLATION - CONTINUED
18.
Install new preformed packing (8), connector (7), and
tee (6) on control valve assembly (1).
19.
Install new preformed packings (4 and 3) and connect
hose assemblies (5 and 2) to tee (6).
1
2
3
4
8
7
6
5
397-693
20.
Connect blade tip hoses (WP 0223 00).
21.
Connect circle drive hoses (WP 0225 00).
22.
Connect side shift hoses (WP 0228 00).
23.
Connect articulation hoses (WP 0227 00).
24.
Connect centershift hoses (WP 0226 00).
25.
Connect wheel lean hoses (WP 0224 00).
26.
Connect blade lift hoses (WP 0222 00).
27.
Connect scarifier hoses (WP 0229 00).
28.
Connect hydraulic control rods (WP 0218 00).
29.
Start engine (TM 5-3805-261-10).
30.
Operate control levers. Cycle system through at least five full-travel movements to bleed the air from hydraulic system.
31.
Stop engine and check for leaks.
32.
Check hydraulic oil level and fill as necessary (WP 0216 00).
0237 00-10
