TM 5-3805-261-23-1
HYDRAULIC TANK FILTERS REPLACEMENT - CONTINUED
0231 00
REMOVAL
WARNING
DO NOT disconnect or remove any hydraulic system line or fitting unless engine is shut down and
hydraulic system pressure has been relieved. Tighten all connections before applying pressure. Escap-
ing hydraulic fluid under pressure can penetrate the skin, causing injury to personnel.
At operating temperature, hydraulic oil is hot. Allow hydraulic oil to cool before disconnecting any
hydraulic lines. Failure to follow this warning may cause injury to personnel.
1.
Remove cover (7) slowly to relieve vapor pressure.
2.
Remove four bolts (2), washers (3), bolts (4), washers (5), and manifold (6).
3.
Remove and discard two filter elements (1) and preformed packings (8).
2
4
3
1
5
6
8
7
397-803
397-803
0231 00-2