TM 5-3805-261-23-1
HYDRAULIC OIL COOLER REPLACEMENT - CONTINUED
0230 00
REMOVAL
NOTE
Place container under two plugs.
1.
Remove two plugs (8) to drain core assembly (9).
2.
Install two plugs (8) to prevent contamination.
CAUTION
Cap hose ends and plug open ports to prevent contamination.
NOTE
Tag hoses before disconnecting to aid in installation.
3.
Disconnect two hose assemblies (7).
4.
Remove two O-rings (6), connectors (5) and preformed packings (4). Discard two preformed packings.
5.
Remove two nuts (3), washers (2), and brackets (1).
NOTE
Remove two bolts (11) only if inspection indicates replacement is necessary. If bolts must be removed, it
will first be necessary to remove radiator support (WP 0052 00).
6.
Remove two bolts (11) and washers (10) through cut-outs for rear signal lights in radiator grille. Discard two bolts, if
necessary.
7.
Support core assembly (9).
8.
Remove two bolts (14) and washers (13).
9.
Remove core assembly (9).
NOTE
Remove seal only if inspection indicates replacement is necessary.
10.
Remove and discard seal (12) from front of radiator, if necessary.
1
12
4 56 7
23
13 14
8
11
10
9
397-2404
0230 00-2
