TM 5-3805-261-23-1
HYDRAULIC OIL COOLER REPLACEMENT - CONTINUED
0230 00
CLEANING AND INSPECTING
Clean and inspect all parts in accordance with WP 0020 00.
INSTALLATION
1.
Install new seal (12) on front of radiator, if removed.
2.
Position core assembly (9) on radiator.
3.
Install two washers (13) and bolts (14).
4.
Install two washers (10) and new bolts (11) through rear signal light cut-outs in radiator grille, if removed.
5.
Install two brackets (1), washers (2), and nuts (3).
6.
Install two new preformed packings (4) and connectors (5).
7.
Install two new O-rings (6) and connect two hose assemblies (7) to left and right front core assembly (9).
8.
Install rear signal lights (WP 0108 00).
9.
Install fan (WP 0063 00).
10.
Install shields, baffles, and plates (WP 0053 00).
11.
Install left side engine panel (WP 0182 00).
12.
Start engine (TM 5-3805-261-10).
13.
Stop engine and check for leaks.
14.
Check hydraulic oil level and fill as necessary (WP 0216 00).
END OF WORK PACKAGE
0230 00-3
