TM 5-3805-261-23-1
LEANING WHEEL HOSES AND FITTINGS REPLACEMENT - CONTINUED
0224 00
INSTALLATION - CONTINUED
13.
Install new preformed packing (6), connector (7), new O-ring (8), new preformed packing (5), connector (4), and new
O-ring (3).
14.
Install hoses (1 and 2).
1
8
2
7
3
4
5
6
397-752
15.
Connect blade lift hoses (WP 0222 00).
16.
Connect scarifier hoses (WP 0229 00).
17.
Remove leaning wheel lock pin (TM 5-3805-261-10).
18.
Check lever of hydraulic tank and refill to proper level (WP 0216 00).
19.
Start engine (TM 5-3805-261-10).
20.
Operate control levers. Move system through at least five full movements of travel to bleed air from system.
21.
Stop engine.
22.
Check for leaks.
23.
Install right side front frame cover (WP 0179 00).
END OF WORK PACKAGE
0224 00-7
