TM 5-3805-261-23-1
LEANING WHEEL HOSES AND FITTINGS REPLACEMENT - CONTINUED
0224 00
REMOVAL - CONTINUED
6.
Remove bolt (28), washer (27), and clip (21) from
21
frame.
2
7.
Remove hoses (1 and 2) and O-rings (22 and 29) from
elbows (23 and 26). Discard O-rings.
8.
Remove hoses (1 and 2) from frame.
1
28
9.
Remove elbow (23), preformed packing (24), elbow
29
(26), and preformed packing (25). Discard preformed
22
27
23
packings.
24
26
25
397-756
10.
Disconnect hoses (38 and 40) and O-rings (36 and 37) from bottom of leaning wheel check and relief valve (31). Dis-
card O-rings.
11.
Remove connector (35), preformed packing (34), connector (33), and preformed packing (32). Discard preformed pack-
ings.
12.
Remove and discard tie strap (39).
13.
Remove hoses (38 and 40) and O-rings (41 and 45) from leaning hydraulic cylinder (44). Discard O-rings.
14.
Remove elbow (30), preformed packing (46), elbow (42), and preformed packing (43) from leaning wheel hydraulic
cylinder (44). Discard preformed packings.
30
46
31 32
45
33 34
35
38
36
37
38
39
43
42
41
44
40
40
397-2367
0224 00-4
