TM 5-3805-261-23-1
BLADE FLOAT LINES, FITTINGS, AND HOSES REPLACEMENT (CCE MACHINE) - CONTINUED
0221 00
REMOVAL - CONTINUED
31
30
13.
Remove two bolts (33), washers (34), clamps (32),
29
12
32
and spacers (35).
14.
Remove bolt (36) and clip (37).
33
15.
Disconnect hose assemblies (12 and 38) from elbows
(30 and 39) at valve assembly (42) on left side of
machine.
34
16.
Remove hose assemblies (12 and 38) from machine.
42
17.
Remove elbows (30 and 39) and two preformed pack-
33
35
ings (29). Discard preformed packings.
18.
Remove and discard two preformed packings (31).
38
36
29
31
37
39
397-724
CLEANING AND INSPECTION
Clean and inspect all parts in accordance with WP 0020 00.
INSTALLATION
NOTE
Lightly lubricate all preformed packings with clean oil before installation.
1.
Install two new preformed packings (29) and elbows (30 and 39) to valve assembly (42) on left side of machine.
2.
Position two hose assemblies (12 and 38) to machine.
3.
Install two new preformed packings (31) and connect hose assemblies (12 and 38) to elbows (30 and 39).
4.
Install clip (37) and bolt (36).
5.
Install two spacers (35), clamps (32), washers (34), and bolts (33).
6.
Install two new preformed packings (23) and elbows
(22 and 25) to valve assembly (24) on right side of
21
15
22
19
machine.
23
7.
Position two hose assemblies (15 and 26) to machine.
27
20
8.
Install two new preformed packings (21) and connect
hose assemblies (15 and 26) to elbows (22 and 25).
28
9.
Install two spacers (20), clamps (19), washers (28),
and bolts (27).
24
27
23
25
21
26
397-723
0221 00-4
