TM 5-3805-261-23-1
HYDRAULIC DRIVE PROTECTION COVER REPLACEMENT - CONTINUED
0199 00
REMOVAL
1.
Remove three bolts (1) and washers (2) from plate (3) and metal molding (6) located below hydraulic tank.
2.
Remove two bolts (4), washers (5), and plate (3).
3.
Remove remaining two bolts (4), washers (5), and metal molding (6).
1
2
3
6
5
4
397-625
CLEANING AND INSPECTION
Clean and inspect all parts in accordance with WP 0020 00.
INSTALLATION
NOTE
Do not tighten bolts.
1.
Install metal molding (6), two washers (5), and bolts (4).
NOTE
Do not tighten bolts.
2.
Install plate (3), two washers (5), and bolts (4).
3.
Install three washers (2) and bolts (1).
4.
Tighten four bolts (4).
END OF WORK PACKAGE
0199 00-2
