TM 5-3805-261-23-1
OPERATOR'S PANEL CONSOLE REPLACEMENT - CONTINUED
0193 00
INSTALLATION - CONTINUED
6.
Install panel (36), two washers (52), and bolts (53).
7.
Install clip (39), washer (37), and bolt (38).
25
8.
Position grommet (26) and wiring harnesses (24 and
24
2
2) and push through opening in panel (36). Seat lips of
grommet around edge of opening.
30
26 28 29
9.
Connect wiring harness (25) to wiring harness (24).
31
27
10.
Install main circuit breaker (35), two screws (27), and
nuts (34).
36
11.
Install battery disconnect switch (33), plate (28),
washer (29), and nut (30).
12.
Install four washers (32) and bolts (31) on left side of
35
32
operator panel console (4).
34
4
33
397-614
13.
Install disc (15), bearing (16), lever (14), washer (21), spring (17), seat (20), washer (19), and nut (18) in panel (13).
14.
Install plate (12), two washers (22), and bolts (23).
15.
Position panel (13) on right side of operator panel console (4).
4
13
12
23
22
14
21
20
19
15
18
16
17
397-613
0193 00-5