TM 5-3805-261-23-1
CAB DOORS AND LATCH ASSEMBLIES MAINTENANCE (CCE MACHINE) - CONTINUED
0188 00
INSTALLATION - CONTINUED
7.
Use sling to install right door (1) on cab. Align with pencil marks made previously.
NOTE
1
Do not tighten nuts.
Install screws
as
noted
during
removal.
8.
Install nine screws (16), washers (15), and nuts (14).
9.
Install three screws (18), washers (11), and nuts (10).
10
10.
Install two screws (17), washers (13), and nuts (12).
11
NOTE
12
Space should be 0.16 in. (4 mm).
13
11.
Close right door. Check space between door lip and
cab all around door. Tighten nuts (10, 12, and 14)
14
when space is correct.
15
18
17
397-592
16
12.
Install two spacers (9), plate (8), two washers (7), and
3
nuts (6).
45
2
1
13.
Install three spacers (2), plate (3), three washers (4),
and nuts (5).
14.
Remove sling.
6
7
8
9
397-2157
0188 00-14
