TM 5-3805-261-23-1
CAB DOORS AND LATCH ASSEMBLIES MAINTENANCE (CCE MACHINE) - CONTINUED
0188 00
ASSEMBLY - CONTINUED
18.
Install handle (30), two bolts (22), handle (29) and two nuts (28).
19.
Install plug (23).
20.
Install new seals (26 and 24) as follows:
a.
Cut to size from bulk seal.
Make sure temperature of adhesive is above 60F (16C) and that adhesive is mixed thoroughly.
b.
c.
Put 0.01 in. (0.25 mm) thickness of adhesive on surface of seal and door that will make contact. See (B) on illustra-
tion below.
d.
Put seals in position on door.
NOTE
Put pressure on seals to make sure all surfaces of adhesive are in contact. Seals can be moved for a short
amount of time.
21.
Install hinge (27) and 14 new rivets (25).
26 27
22
25
24
23
B
30
397-2159
29 28
397-594
0188 00-12
