TM 5-3805-261-23-1
CAB DOORS AND LATCH ASSEMBLIES MAINTENANCE (CCE MACHINE) - CONTINUED
0188 00
INSTALLATION
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during proce-
dure. Ensure that any lifting device used is in good condition and of suitable load capacity. Keep clear of
heavy parts supported only by lifting device. Failure to follow this warning may cause injury or death to per-
sonnel.
NOTE
Door weighs 85 lb (39 kg).
1.
Attach sling to left door (1).
2.
Use sling to position door (1) on cab. Align with pencil marks made previously.
NOTE
Do not tighten screws.
3.
Install 14 screws (19), washers (20), and nuts (21).
NOTE
Space should be 0.16 in. (4 mm).
4.
Close left door. Check space between door lip and cab
20
19
21
all around door. Tighten nuts (21) when space is cor-
rect.
5.
Remove sling.
1
397-593
6.
Attach sling to right door (1).
0188 00-13
