TM 5-3805-261-23-1
TRANSMISSION CONTROL ADJUSTMENT - CONTINUED
0150 00
TRANSMISSION DIRECTION CONTROL ADJUSTMENT - CONTINUED
9.
Shift transmission control lever (7) to FORWARD-
7
NEUTRAL position.
10.
Retract control cable (13) by pushing down on rod end
(9) as far as control cable will allow.
11.
Inspect rod end (9) and lever (8) to see if hole in rod
end aligns with hole in lever. If holes are not aligned,
measure and record the distance between them.
12.
Loosen nut (12).
8
10
13.
Adjust rod end (9). Thread rod end on control cable
9
(13) half the distance measured in step 11.
14.
Install new lockwasher (10) and bolt (11).
15.
Tighten nut (12).
12
13
11
397-453
TRANSMISSION SPEED CONTROL ADJUSTMENT
1.
Remove bolt (16) and lockwasher (15). Discard lock-
washer.
7
2.
Retract control cable (17) by pushing down on rod end
(14) as far as control cable will allow. The selector
spool in the transmission will be in SIXTH speed.
14
15 16
17
397-454
0150 00-3
