TM 5-3805-261-23-1
CHANGING TRANSMISSION AND DIFFERENTIAL OIL - CONTINUED
0147 00
REFILLING
1.
Install new breather (7) on top of transmission.
7
397-1065
2.
Remove transmission/differential fill cap (8).
Add oil to transmission/differential through fill tube (10). See Preventive Maintenance Checks and Services for trans-
3.
mission/differential oil capacity (WP 0022 00).
4.
Check oil level with dipstick (9). Oil should be at COLD SAFE START mark.
5.
Install transmission/differential fill cap (8).
6.
Close left side screen door (WP 0055 00).
7.
Close right side engine doors (TM 5-3805-261-10).
8.
Turn battery disconnect switch to ON position and start engine (TM 5-3805-261-10).
9.
Operate machine until transmission is at normal operating temperature (TM 5-3805-261-10).
10.
Open right side engine doors (TM 5-3805-261-10).
8
9
11.
With engine at low idle, check oil level with dipstick
(9). Oil should be between ADD and FULL marks.
12.
If necessary, remove fill cap (8) and add oil until level
is at FULL mark.
13.
Install fill cap (8) and shut down engine.
397-1050
10
14. Inspect for oil leaks.
15. Close right side engine doors (TM 5-3805-261-10).
16. Close left side screen door (WP 0051 00).
END OF WORK PACKAGE
0147 00-3
