TM 5-3805-261-23-1
SUPPLEMENTAL STEERING PUMP AND MOTOR REPLACEMENT - CONTINUED
0091 00
INSTALLATION - CONTINUED
5.
Connect two hydraulic tubes (7) and install new O-
rings (8).
7,8
397-493
6.
Connect two wire assemblies (1) and install two new
1
3 2
397-271
7.
8.
Turn battery disconnect switch to ON position and start engine (TM 5-3805-261-10).
9.
Check for leaks. Stop engine.
10.
Check hydraulic oil level. Refill hydraulic tank, as required (WP 0216 00).
11.
Close left side engine door (TM 5-3805-261-10).
END OF WORK PACKAGE
0091 00-6