TM 5-3805-261-23-1
WATER PUMP REPLACEMENT - CONTINUED
0060 00
REMOVAL
1.
Loosen two clamps (4) at left side of engine.
CAUTION
Cap all hose and tube ends and plug all open ports to prevent contamination.
2.
Disconnect hose (6) from housing (3) by sliding up on tube (5).
3.
Remove two clamps (4).
4.
Loosen clamp (9) at front of water pump (2), disconnect hose (8), and remove clamp (9).
5.
Remove connector (10), elbow (11), and bushing (7).
6.
Remove two bolts (1).
4
3
2
1
5
11
7
10
9
6
8
397-181
14
2
7.
Support water pump (2) and remove two bolts (18).
18
12
8.
Remove two clamps (16) and hose (17) from tube
(15).
5
9.
Remove water pump (2), gasket (14), and preformed
packing (13) by disconnecting from hose (17). Discard
gasket and preformed packing.
10.
Remove hose (12) from tube (5).
13
16
17
397-182
16
15
0060 00-2
