TM 5-3805-261-23-1
ENGINE OIL COOLER REPLACEMENT
THIS WORK PACKAGE COVERS
Removal, Cleaning and Inspection, Installation
INITIAL SETUP
Maintenance Level
Equipment Conditions
Unit
Machine parked on level ground (TM 5-3805-261-
10)
Tools and Special Tools
Parking/emergency brake applied (TM 5-3805-261-
Tool kit, general mechanic's (Item 89, WP 0348 00)
10)
Materials/Parts
Implements lowered to ground (TM 5-3805-261-
Antifreeze (Item 5, WP 0349 00)
10)
Rag, wiping (Item 35, WP 0349 00)
Engine off (TM 5-3805-261-10)
Gasket (3)
Battery disconnect switch in OFF position (TM 5-
3805-261-10)
References
Engine oil filter head removed (WP 0026 00)
Left side engine panel removed (WP 0182 00)
REMOVAL
1.
Remove plug (9) on left side of engine.
2.
Drain coolant from radiator (WP 0065 00).
1
2
3.
Install plug (9) after coolant is completely drained.
3
4.
Remove four bolts (2) from coolant tube (1).
5.
Remove four bolts (4).
6.
Remove two bolts (8) and four bolts (6) from trans-
mission oil cooler housing (7) to remove core assem-
bly (11).
5
7.
Remove and discard gasket (5).
4
8.
Remove core assembly (11) and gaskets (3 and 10).
2
Discard gaskets.
11
10
6
9
7
8
397-1335
