TM 5-3805-261-23-1
SERVICE UPON RECEIPT
GENERAL
1.
When a used or reconditioned 130G Series Grader is first received, determine whether it has been properly prepared for
service and is in condition to perform its mission.
2.
Follow the inspection and servicing instructions that follow.
INSPECTION INSTRUCTIONS
00019 00
1.
Read and follow all precautions and instructions on DD Form 1397.
2.
Remove all packing and shipping material, such as tape, tie downs, protective covers, and shipping seals. Remove tape
from exhaust pipe.
WARNING
Solvent cleaning compound MIL-PRF-680 Type III is an environmentally compliant and low toxic material.
However, it may be irritating to the eyes and skin. Use protective gloves and goggles. Use in well-ventilated
areas. Keep away from open flames and other sources of ignition. Failure to follow this warning may cause
injury or death to personnel.
3.
Clean any exposed metal parts coated with rust preventive compound. Use solvent cleaning compound (Item 8, WP
4.
Inspect equipment for any damage incurred during shipment. Check if equipment has been modified.
5.
Check equipment against packing slip to ensure that shipment is complete. Report any discrepancies on SF Form 364.
6.
Clean all external surfaces as needed. Touch up any paint scratches (TM 43-0139 and TB 43-0242).
7.
Remove all Basic Issue Items (BII), Components of End Item (COEI) and Additional Authorization List (AAL) items
and stow in accordance with TM 5-3805-261-10.
SERVICING INSTRUCTIONS
00019 00
1.
Service machine in accordance with PMCS instructions in TM 5-3805-261-10 to include the monthly all systems
machine exercise and PMCS instructions in this manual (WP 0022 00 and WP 0023 00). Schedule the next PMCS on
DA Form 2404 or DA Form 5988-E.
2.
Refer to TM 5-3805-261-10 and perform functional checks of all major machine systems to ensure machine is ready for
operation. Remove all warning tags.
END OF WORK PACKAGE
