TM 5-3805-261-20
BODY, CAB, HOOD AND HULL MAINTENANCE.
13-22.
Seat Belt. (Sheet 2 of 2)
REMOVAL
1.
Remove two nuts (1) and bolts (2) from
seat
(6,
Figure
13-68)
in
operator’s
compartment.
2.
Detach belt (3) from two eyebolts (5).
3.
Remove belt (3) from seat (6).
4.
Remove two nuts (4) and eyebolts (5).
CLEANING
Clean all parts. Refer to Chapter 2.
INSPECTION
Inspect all parts. Refer to Chapter 2.
INSTALLATION
1.
Install two eyebolts (5) and nuts (4, Figure
13-68).
2.
Install belt (3) through seat (6).
3.
Attach belt (3) to eyebolts (5).
4.
Install two bolts (2) and nuts (1).
NOTE
Return
130G
Grader
to
original
equipment condition.
Figure 13-68.
End of Task
13-83
